Skagit County, Washington · Fidalgo Island to the Skagit Valley

Custom Home Builder in Skagit County, WA

Skagit County holds a lot of different ground: low-bank waterfront on Samish Island, rock and timber on Fidalgo, rural acreage in the foothills, and the flat, fertile valley floor the river built. Each one changes what a new house needs before the first wall goes up. We're a design-build team based in Anacortes, and we build custom homes across the county, starting with the questions about water, flood zones and the land next door that decide whether a lot works.

Custom Homes

A House Built for the Lot You Actually Have.

Most people who call us about a custom home in Skagit County already have a piece of land in mind, or they're close to buying one. What they don't always have is a clear picture of what that land will allow. In this county, the answer often comes down to three things you can't see from the road: where the water will come from, whether the lot sits in the Skagit River floodplain, and whether a farm or forest zone sits next door.

So that's where we start. Before design gets far, we confirm whether the lot is in a city or the county, check the water source, the flood zone, the zoning, the septic and any shoreline rules, and tell you what they mean for the house. Then your architect or designer draws a home that fits the site, and we price it twice: once from concept drawings and once when every selection is locked. If the budget and the plans don't match, you'll hear it from us in the first meeting.

More about Dihedral Builders →

Based in
Anacortes, Fidalgo Island. Office at 1610 Commercial Ave
What we build
Custom new homes, waterfront and low-bank homes, rural and acreage homes
Where
Anacortes, Samish Island, Mount Vernon, Burlington, La Conner and rural Skagit County
Permits
We handle them with Skagit County Planning & Development Services or your city
Warranty
3-year craftsmanship warranty, plus 1- and 11-month inspections
Licensed
WA contractor license DIHEDBL881N1. Building in Washington since 2012

Written by the Dihedral Builders team in Anacortes · Reviewed by Chad Gailey, founder · Updated November 2026

What we do

How we build custom homes in Skagit County

Check the land before the drawings

A great plan on the wrong lot is an expensive lesson. We walk the site with you and run down the things that can stop a project or reshape it: the water source, the flood zone, setbacks from farm or forest land, shoreline rules and septic. If you haven't bought yet, that's the best time to call us.

Design around what the site allows

Your architect or designer draws the house, or we introduce you to one. A structural engineer and energy designer work out the details. On the valley floor, the floor height and foundation are set by the flood rules from day one. On the water, the setbacks and exposure shape the plan. The drawings are yours, even if you stop there.

Build it carefully, then stand behind it

Chad is involved on every job, and the trades on site are people he's worked with for years. You can follow progress, photos and the budget in a client portal. When the house is done, we walk it with you, come back at one month and eleven months, and back the work with a three-year craftsmanship warranty.

Skagit County

Building in Skagit County: what's different here

Skagit County runs from saltwater islands to the North Cascades, and the rules for building a house change with the ground. These are the conditions we plan around before design starts.

Water comes first

State law requires a legal and adequate water source before the county can issue a building permit, and in much of Skagit County that's the hardest question on the lot. A state instream flow rule has covered most of the Skagit River watershed since April 2001. After a 2013 state Supreme Court decision, new wells there are junior to the river and can be cut off when it runs low, which the Department of Ecology says happens an average of 95 days a year, mostly in late summer and early fall.

Fidalgo Island and the Samish River subbasin are outside the rule. Elsewhere, the usual answer is Skagit PUD or another public water system. Ecology also runs mitigation programs in limited areas near the Skagit River and Big Lake. We confirm the water before you commit to a lot.

The valley floor and the floodplain

The Skagit Valley is flat and fertile because the river built it, and much of it is mapped flood hazard area. Building there takes a floodplain permit before construction starts. The lowest floor, including any basement, has to sit at least one foot above the base flood elevation, and so does the heating and mechanical equipment. A surveyor's elevation certificate confirms the height. New homes aren't allowed in the floodway itself.

None of that has to make a house awkward. Set the floor height and foundation early, and the design can be built around them instead of fighting them.

Farm and forest next door

Skagit County protects its farmland and forests harder than most. Since 1979, land zoned Agricultural Natural Resource Lands has had a 40-acre minimum lot size. If your lot is within 500 feet of a natural resource land zone, you record a title notice with your permit. If it borders one, the house has to sit 200 feet back unless you sign and record a waiver, and for farm and industrial forest land, the neighboring owner has to approve it. Expect the normal traffic, dust, noise and smell of working land.

Waterfront, from Samish Island to Fidalgo

Outside city limits, waterfront lots fall under Skagit County's Shoreline Master Program. Many single-family homes don't need a full shoreline permit, but they still need a letter of exemption and have to meet the program's rules. In coastal flood zones, the house sits on pilings, with the lowest framing at least one foot above flood level. Inside Anacortes, Mount Vernon, La Conner or another town, the city's own shoreline rules apply instead. We sort out which rules govern your lot and build the review time into the schedule.

Step by step

Planning a custom home in Skagit County, step by step

  1. Site walk and first conversation We walk the lot with you. We talk about what you need and what you want to spend. Then we tell you honestly if the two match.

  2. Lot, water and zone check We confirm whether the lot is in a city or the county, and that it is a legal lot. We check the water source, the flood zone, the zoning, any farm or forest land next door, shoreline rules, and the septic.

  3. Design and engineering Your architect or designer draws the house. A structural engineer and energy designer work out the details. In the floodplain, the floor height and foundation go into the plans from the start. The drawings are yours, even if you stop there.

  4. Two rounds of pricing First, an early estimate from concept drawings, while changes are still cheap. Then a final budget, once every selection is locked.

  5. Permit We file with Skagit County or the city. For county lots, we line up the approved water source, sewage source and access permit first, plus any floodplain permit and title notices.

  6. Construction Work usually starts six to eight weeks after you sign the construction agreement. That gives us time to order materials and schedule trades. You can follow progress, photos and the budget in a client portal.

  7. Walk-through and warranty We walk the finished house with you and complete a punch list. We come back at one month and again at eleven months. Every project has a three-year craftsmanship warranty.

Recent work

Custom homes we've built in Skagit County

What clients say

Client voices
★★★★★

I designed my home on a sketch pad and presented Chad with all kinds of ideas and challenges. Chad met each idea with enthusiasm and counseled me beautifully on exactly how to achieve what I was after. … Even though we were in the middle of COVID and started mid-winter, Chad turned my dream home into reality, within the timeframe and budget I asked for.

Rane MacDonough · Anacortes · The MacDonough Residence

Read all reviews

Client voices
★★★★★

My wife and I did a major home renovation this year, our first time doing something of this nature, and we were both very glad to have Dihedral Builders as our contractor. Their employees and sub-contractors were all top-notch. Highly recommend giving them a call and consideration if remodel or decking is in your near future.

Jon and Heidi N. · Mount Vernon, WA

Read all reviews

The person behind the work

You work with Chad on every home.

Chad Gailey grew up on job sites behind his father, a plumber and general contractor who checked every trade's work, not just his own crew's. After five years in the Coast Guard patrolling Alaska's waters, Chad started building and remodeling homes in Anchorage, then moved to Washington and founded Dihedral Builders in 2012. Anacortes and Skagit County have been home ground ever since.

Dihedral stays small on purpose. Chad is involved in every custom home, the trades on site are people he's worked with for years, and if something comes up mid-project you call him, not a switchboard.

Read Chad's story →

Chad Gailey, founder of Dihedral Builders, on a job site in Skagit County, WA
Common questions

Custom Homes in Skagit County — FAQ

Do I need a permit to build a custom home in Skagit County?

Yes. Inside a city, such as Mount Vernon, Burlington or Anacortes, the city issues it. Outside city limits, Skagit County Planning & Development Services issues it. The county needs proof of a legal lot, an approved water source, an approved septic or sewer connection, and an access permit. We prepare the plans and file the permits for you.

Can I drill a well for a new home in Skagit County?

It depends on where the lot is. Most of the Skagit River watershed falls under a state instream flow rule from 2001. Since a 2013 state Supreme Court ruling, new wells there can be cut off when the river runs low. The county can't issue a building permit without a legal and adequate water source. Fidalgo Island and the Samish River subbasin are outside the rule. Elsewhere, the usual answer is Skagit PUD or another public water system. We check the water before you commit to a lot.

How often does the Skagit River fall below the protected flow levels?

Often. The Department of Ecology reports the river has missed the rule's flow levels an average of 95 days a year over the past 28 years. Most of those days fall in late summer and early fall. That is why a new well under the rule isn't treated as a reliable household supply. Homes on public water are not affected.

Can I build a house in the Skagit River floodplain?

Often, yes, with extra rules. You need a floodplain permit before construction starts. The lowest floor, including any basement, must sit at least one foot above the base flood elevation. So must the heating and mechanical equipment. A surveyor's elevation certificate confirms the height. New homes are not allowed in the floodway itself.

What if my lot is next to farmland or forest land?

Plan for it early. Skagit County protects its farm and forest lands. If your lot is within 500 feet of a natural resource land zone, you record a title notice with the permit. If it borders one, the house must sit 200 feet back, unless you sign and record a waiver. Expect normal farm noise, dust and odor nearby.

Do you build on waterfront lots in Skagit County?

Yes. Samish Custom is a low-bank waterfront home on Samish Island. Outside city limits, waterfront lots fall under Skagit County's Shoreline Master Program. Many single-family homes don't need a full shoreline permit, but they still need a letter of exemption and must meet the program's rules. In coastal flood zones, the house sits on pilings, with the lowest framing at least one foot above flood level.

How much does a custom home cost in Skagit County?

It depends on the lot, the size, the design and your selections. We price every home twice. First comes an early estimate from concept drawings, while changes are cheap. Then comes a final budget, once every selection is locked. If your budget and your plans don't match, we'll tell you in the first meeting.

How long does it take to build a custom home?

It depends on the design, the lot and the permits. Design, engineering and permits come first. Construction usually starts six to eight weeks after you sign the construction agreement. You get a detailed schedule before construction begins.

Where is Dihedral Builders based?

Our office is at 1610 Commercial Ave in Anacortes, on Fidalgo Island in western Skagit County. We build across the county, from Anacortes and Samish Island to Mount Vernon, Burlington and La Conner. We also build on Whidbey Island and in the San Juan Islands.

More questions, answered honestly →

Have a lot in mind?

Come by the office on Commercial Ave in Anacortes, call (360) 209-6353, or send a note through our contact form to start a conversation about your custom home in Skagit County. Bring the parcel number, a sketch, or just the address of the lot you're thinking about. We'll tell you what we see.

Start a conversation

More nearby

Local references